H2418L Steel Helical GearBoston Gears stock helical gears are manufactured in both right and left handed configurations with an industry standard 45 helix angle to transmit motion and power between non intersecting shafts that are parallel or at 90 to each other. For parallel shaft operation, helical gears with opposite hand helix angles are required. For shafts at 90, a same hand helix angles must be used. For parallel shaft applications, the overlapping tooth contact of our

SUCNPFCF has nickel plated housing and stainless steel bearing insert

IP69K Flyer

Click here for spec sheets: SUCTF Spec Sheet

always remember that the difference in the number of teeth between the internal gear and pinion should not be less than 15 (14 1/2° PA) or 12 (20° PA)

They are ideal for

Click here for spec sheet: SAPL Spec Sheet

B-Type Seals

the CUCSP has a Hard Chrome bearing insert and a Stainless Steel housing

the SNASHA has an eccentric locking bearing insert

Operates in all positions

the CUCST has a Hard Chrome bearing insert and a Stainless Steel housing

the SNATPA has an eccentric locking bearing insert