Electric and optical fibre cables. Test methods for non-metallic materials - Mechanical tests. Pressure test at high temperature for insulation and sheaths1 Scope This Part 508 of IEC 60811 gives the procedure for a pressure test at high temperature, which typically applies to thermoplastic compounds used for insulating and sheathing materials. NOTE 1 The method is principally intended for thermoplastic materials, but may be used for cross linked materials when specifically required by the relevant cable standard. NOTE 2 The test method is not recommended for thicknesses below 0,7 mm.

Some of these methods are based on the swabbing of comparatively large test surfaces

PD ISO/IEC TR 15446:2004 provides guidance relating to the construction of Protection Profiles (PPs) and Security Targets (STs) that are intended to be compliant with BS ISO/IEC 15408 (the ‘Common Criteria’)

The OCF Resource Type Specification specifies the Resources that have been defined by OCF that may be exposed by an OCF Device

at optimum costs

Manufacturers and suppliers of geotextiles

These metals have a low melting point and offer very good resistance to friction

It can also be to enhance properties of materials to enable their use in specific applications (like capping layers

particularly small and medium-sized enterprises (SMEs)

It gives generic design rules that are intended to be used with the other parts: BS EN 1999-1-2 to BS EN 1999-1-5

to initiate and control a data transfer using D2B

The risk is 10 % of failing to contradict an incorrect declared quality level which is related to the limiting quality ratio (see Clause 4)

Such marking helps you in the consideration of an integral part of the delivery of the machinery