HP EliteDesk 800 G2 Mini Desktop Rack Mount (Modular)3D Printed 1RU rack mount for the HP Elitedesk 800 G2 Mini PC. This is part of our ModMount Range, so you can mix and match your parts! This is an older style mount that has since been replaced with an improved design that works with all of the HP Mini PCs (From G1 through to the current G9 Models): Updated HP Mini PC Rack Mount Design NOTE: You will need to pair this with another ModMount item (Like a Blanking Plate or another MicroPC Mount!) to make

The DFRobot Carrier Board mounts onto a removable sled

Keystone Jacks or Network equipment

The Fibre NTD slides into the frame from the front

The Switch slides into the frame from the front

5 Screws to connect to the tray

SDI to HDMI 12G

The Mini PC slides into the frame from the back after removing the rear retaining plate

3D Printed 1RU rack mount for the Netgear GS108E (Or GS108PE V3) Switch

3D Printed rack mount that can combine your Unifi Switch 8 150W PoE+ Switch (Model: US‑8‑150W) & Unifi Switch Lite 16 PoE (Model: USW-Lite-16-POE (45W)) into a Single RU

3D Printed 1RU rack mount for the Netgear GS108T Switch

NOTE: You will need to pair this with another ModMount item (Like 2 Blanking Plates

simply slide the surround onto the ER-4/ER-6P and then use the included M3 screws to fasten the other two parts (Mikrotik enclosure and Rack arm) to the ER-4/ER-6P