DXW-11-153-3 | Dwyer | Wet/Wet Differential Pressure SwitchThe Series DX is a differential pressure switch that makes a contact output based on the differential between two pressure sources. Wetted materials of brass and flouroelastomer are suitable for use with most gases and water based solutions. The switch can be used for low differential pressure indication with set point on a decrease of pressure as low as 1 psid (0. 07 bar). Download the Catalog Download the Data Sheet Download the Manual

NMX24-SR-T Damper Actuator

Manual reset

20 inch WC [20

while the nitrogen dioxide transmitter is used for diesel engines

AC/DC 24 V

Probe diameter 0

the installed actuator must be mounted with the actuator at or above horizontal

AFB24 Damper Actuator

The Series GSTA Carbon Monoxide/Nitrogen Dioxide Transmitters monitor the gas concentration in underground parking garages and loading docks

JACE 8000 with remote connected 34 point I/O module

Minimum 1” diameter shaft

4DO and 4AO