ND200-105 | ND200 Neutral Density Filter - Absorptive 1.0% TransmissionThe MidOpt ND200 105 is an absorptive neutral density filter with an optical density of 2. 0, transmitting an average of 1% of the visible spectrum. These filters have identical male and female threads on both ends, allowing them to be stacked with other ND filters to achieve various optical densities. Stacking two ND200 filters would be nearly equivalent to an ND400 filter; i. e., visible light transmission would be approximately 0. 01%. All MidOpt

The LSRB1200-625 can be mounted using the PB300-M5 (2 recommended) Swivel Mount Bracket Kit

7 mm Weight 1188 Grams Filter Thread No Filter Threads Operating Temperature Range 0 to 40°C Storage Temperature Range 0 to 50°C Operating Relative Humidity (%) Not Specified Installation Location Not Specified Temperature Sensor No FoV @ Full Frame 12 x 8 mm Line 8k-5µm 13

Advanced Illumination DL15124-WHII3S Downloads:

01 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Colored Glass Filter Diameter M40

The LE1200-530-W is Not Polarized

ITA51-GC-20C ITA51-GC-20C Technical Specifications:

The ODSX30-940-W machine vision light from Smart Vision Lights is a prox light in SVL's ODSX30 spot light series

Swivellink SLM-3TSL-150250

Advanced Illumination RL208W-10059024 Downloads:

Brand Advanced Illumination Series BL128 Wavelength 880 Color Infra-Red (IR) Driver I3S Ingress Protection IP50 Length 02 in Weight 227g Can Be Strobed Yes Can Be Overdrive Strobed Yes Can Be Constantly On Yes Can Be Dimmed Dimmable Connection 2M Flying Lead Full Description

Brand Advanced Illumination Series LL232 Wavelength 940 Color Infra-Red (IR) Driver I3S Ingress Protection Not Rated Length 050 mm Weight 562g Can Be Strobed Yes Can Be Overdrive Strobed Yes Can Be Constantly On Yes Can Be Dimmed Dimmable Connection 2M Flying Lead Full Description

Electrical Characteristics + Voltage 24 VDC V Max Overcurrent Strobe Current 24000 mA Max Overcurrent Strobe Latency 6 us Max Overcurrent Strobe Duration 125 ms Max Overcurrent Strobe Frequency 4000 Hz Max Overcurrent Strobe Duty Cycle 10 % Min Overcurrent Strobe Duration 10 ms Max Overcurrent Strobe Input Power 624 W Max Duty Cycle 10 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 20 mA NPN Trigger Voltage < 1 VDC V NPN Trigger Current 15 mA