Farenhyt RA-100 - Same Day Shipping (SEALED)The RA 100 Remote Annunciator can be used to operate and program the IFP 100 or IFP 1000 Fire Control Panels. The RA 100s keypad and display match the built in annunciator of the IFP 100 control panel. The remote annunciator connects to the control panel via the RS 485 system bus. When the system is in normal operation and has AC power, the Power LED is lit and all other LEDs are off. The other LEDs turn on as alarms, supervisories, troubles, system

The backup amplifier does not require its own microphone and digital message repeater unless a fully redundant voice evacuation system is required

or SS Protocol (panel dependent)

Status Command Center (SCU)

All devices feature plug-in designs with minimal intrusion into the back box

Dimensions: 36”H x 30” W x 8”D (914 mm x 762 mm x203 mm)

or 4-inch square box

The local rail modules supply the power and drivers via a ribbon cable connection to the control display modules

The MIRBPS has four Class B (convertible to two Class A) NACs

Each detector’s address is set with rotary address switches for exact device locations

12/24 VDC operation

Clear Lens

multi-angle sensing with digital filtering to help distinguish real smoke from nuisance sources