Glensound GS-FW012 ip - 4 Circuit 4 Wire With DanteThe GS FW012 ip is the Dante network audio version of the GS FW012 4W unit. Features: Four x 4 wire circuits to from Dante network plus 1 x local input Internal or external mic input with individual gain controls Dante network audio, 4 channel input and output Local cue input on XLR Cue input can be routed to any of the 4 wire outputs 4 wire inputs can be routed to their own output (IFB) Latching momentary lever keys Can be powerd by PoE or Mains

Includes a 0

5" woofer and the patented JBL Slip Stream™ low-frequency port

Use the TX-PSD1 to control RDL modules or other equipment with ground activated control inputs that permit a 24 V pull up

Digital 9000

The single cable is detachable

35mm TRS jack socket located out the way on the rear panel

Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots

Gooseneck or Headset Operation

Integral pole-mount with removable bung

Note: Consoles require a dedicated 12-volt task light connector for use of this product

0 interface standard

The mounting surface is 17" x 11"