FG Flat-End Taper Cross-Cut Fissure Surgical BursCross cut taper fissure burs and cross cut straight fissure burs are useful for sectioning teeth and removing buccal bone. The only difference between the two (as seen in the above image) is that the straight fissure iswellstraight, not tapered. Both types of burs are available in short, regular and surgical Length shank, and regular or long (L) cutting Length. Only the sides of these burs are used to cut, you cannot cut with the tip. Some recommended

Available in 2 sizes:

1 x D7095 Football (BR-368

The resin Head in pairs can be replaced

It is intended for use with the IM-L6200 slow speed motor from iM3

The Advantage 4:1 reduction straight nose cone reduces the speed of the low speed handpiece (motor) and accepts disposable prophy angles for polishing

Drain holes are on the bottom of the bur blocks to help prevent rusting on the burs

The above are designed to fit and be used with 1:1 HP straight nose cones

Air-O-Matic

Easily cleaned in 1:20 solution of bleach and water

the elevator can be pressed to the bottom of the alveolus with leverage to remove the tooth

It includes a full set of scalers and curettes

Storage Recommendations Store between 32º - 77º F (0º - 25º C)