FS3 Momentary Footswitch for the H90Here is our FS3 footswitch, our special take on a Triple Momentary Footswitch for the Eventide H90. The Eventide is set to work with normally open switches by default so that is what we have gone with. They are heavy duty soft touch switches so no mechanical clicks to worry about. If you need a cable for the footswitch then grab a stereo TRS one from our cables section. The pedal is built with: White and black 3D printed enclosure Neutrik plug socket

and this one has the additional benefit of having soft touch switch

1mm 9v centre negative DC Socket (150mA on the QRL

The buffer has 1M input impedance and 1K output impedance

controlled via a TRS relay switching output on your pedalboard controller such as the Boss MS-3

you can add a Bright Onion TRS cable to the order above

Tap Tempo - This will add a momentary footswitch that can be used as a tap tempo for delays that accept tap tempo footswitches

1mm 9v centre negative DC socket (60mA draw)

it is not possible for both A and B to be active together

The pedal has a Bypass switch to bypass the selected loop(s) leaving your clean signal

Wampler dual footswitch pedals

Size: 20mm(H)x120mm(W)x135mm(D)

Mini Bright Onion Pedals