7010CTRV1VSULP3 - NSK Precision Angular Contact - 50x80x16mmThis 7010CTRV1VSULP3 bearing is a Super Precision angular contact bearing with a 15 contact angle and a phenolic cage, this bearing is a universal fit single bearing with rubber seals, a light preload and a P3 precision rating. The bearing's dimensions are 50x80x16. 70 10 CTR V1V SU L P3 Extra Light Series 50mm Bore Size 15 Contact Angle Non Contact Rubber Seal Single Universal Light Preload Precision Rating

13 09 k j Narrow Bore Size - 45mm Tapered Bore (1:12 on Diameter) Pressed Steel Cage Normal Radial Internal Clearance

This 7208CTRDUDMP3 bearing is a Super Precision angular contact bearing with a 15° contact angle and a phenolic cage

This 6919VV bearing is a Sealed Thin Section Deep Groove Radial Ball Bearing with a non-contact rubber seal

This QJ318N2MA/C3 bearing is a a four point contact bearings with two locating slots in the outer ring

This S6202 2RSR FAG bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 15x35x11

This 6314 M FAG bearing is a Open Type Deep Groove Radial Ball Bearing with a Machined Brass cage

22 22 m Wide Bore Size - 110mm Machined Brass Cage

a two piece roller-guided solid brass cage

with Axial Internal Clearance Smaller than Normal Machined Brass Cage

NU 10 14 M1 C3 Two Flanges on Outer Ring and No Flanges on Inner Ring Extra Light Series 70mm - Bore Size Solid Brass Cage

The bearing's dimensions are 85x150x36mm

3/8G 10 Self Lube Cast Iron Pillow Block Unit 2