Autococker Rebuild/ServiceTo get your autococker serviced: Use the contact tab (https: beardedworks. com pages contact) to send marker pictures and a brief description of the issues you may be experiencing. Service fee includes labor and orings for rebuild, additional items such as springs, cup seals, regulator seats, solenoid gaskets or other parts may be required to ensure a properly functioning marker and will be an additional cost. Upon acceptance of the work you will be

using a cam based action to ensure easy gassing up of your paintball guns even those using high pressure tanks and ball valves that can be very difficult to gas up with other systems

Checkit Pump kit

The Phat Hammer also includes a 1/4x28 hardened lug w/ nylon set screw to keep it from slipping

Stamped aluminum

Not all classic automag valve threads are located the same orientation and valve cap rotation may not align the same on all valves

The bolt comes with two sets of o-rings (three o-rings in each set) for easy matching to your guns bore

It comes with everything needed for immediate install and use

It will work for all new and old school autocockers

The harder o-ring goes on the bolt tip and the softer o-rings on either side of the valve port

The autococker bolt has an aluminum center section for strength and a delrin tip and back so anywhere the bolt may contact the internal bore of the gun you are guaranteed a friction free rocket fast response

The three large gas transfer ports are designed to maximize your velocity

No more mail in service