Notifier FRM-1 Addressable Relay ModuleThe Notifier FRM 1 is an intelligent addressable relay module that provides a dry contact output for activating auxiliary devices such as fans, dampers, control equipment, and door holders. It uses two Form C dry contacts that switch together and can be activated manually or through panel programming on a select basis.

Wire Size: Accepts 12 to 18 AWG conductors

open or ground fault occurring on the SLC loop will be detected as a trouble but all SLC devices will continue to operate

Because of their sealed construction

Simplex 4100-0620 4100ES Basic Transponder Interface Card

They are both impact and vandal resistant and provide a convenient strobe intensity selection

Slide-in labeling for LEDs and switches provides designation flexibility for mass notification labeling

and 4098-9780

Edwards 276A-REL Manual Release Station is a normally-open

No Marking

The Notifier NMM-100-10 is an intelligent addressable ten-input monitor module for FireWarden series panels

Creating and reviewing messages is straightforward using MDM’s onboard record and playback switches

It supports up to 10 Class B initiating-device circuits (IDCs) or 5 Class A IDCs when circuit pairs are converted