140 3-NO58 - RENOLD 1 3/4 Inch Pitch Premier Standard LinkThe standard connecting link for ANSI series detachable chains, also used on riveted chains where high speeds or arduous conditions are encountered. Supplied with two connecting pins riveted into the outer plate, the other outer plate being a press fit onto the pins and secured by split pins after assembly. Press fit connecting links can only be used once; new links must always be used to replace dismantled links.

This 1312J bearing is a double row

The bearing's dimensions are 30x62x20mm

This XXLJ95WSRR R&M bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 95x145x24

The NUP2306ECP SKF bearing is suitable for a wide range of applications

The design of the NJ307ECM SKF bearing ensures even load distribution and carries heavy radial loads while maintaining a low cross-sectional height and low friction

This 355RSS Hoffmann bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance

This 7216BWG bearing is a single row angular contact bearings with a 40° contact angle

62 07 TCG12 P4 Single Row 62 Series Bore Size - 07 - 35mm Inner Ring Guided Phenolic Resin Cage Precision Rating

72 08 B TVP UO Light Series 40mm - Bore Size Angular Contact with 40° Contact Angle Solid window cage made from glass fibre reinforced polyamide Universal design for fitting in pairs

Non-Separable 95mm - Bore Size Optimized Internal Design Stamped Steel Cage

The bearing's dimensions are 85x120x18mm

42 01 ATN9 Double Row