HORNADY Stuck Case RemoverThe Hornady Stuck Case Remover is designed to easily extract the most stubborn case from a standard sizer die without damaging the die. The simple removal process is quick and easy. Comes shipped with tap, drill bit, bolt and remover body. Unscrew the expander decapping rod until the decapping pin is free of the primer flash hole in the stuck case. Secure the reloading die in a vice and drill through the center of the case head with the included drill

Sensor: 640x480 @ 17 µm (NETD <25 mK)

Capacity*: 39

Safe disassembly

The three removable internal shims allow for additional customisation as required

The inside and outside of the neck are turned simultaneously

Rated up to a 3500ft/lb impact energy

The second layer dissipates energy and completes the maximum recoil absorption

Using a Neck Expander Die during the reloading process involves inserting a brass casing into the die

18" barrel

the Hawke Sports Optics 3-9x50 Vantage AO Riflescope boasts a large objective to draw in generous amounts of light to allow its use at dawn and dusk

cameras or microscopes

Military Style Chamber Mop (AR Platform Rifles)