3" Shackle Assembly for Left Rear Torsion Arm, X7Hyper Racing # 03 030 1 Shackles are used to position the torsion arm at the correct angle for the correct progressive spring rate. Torsion arm angle is a function of shackle length in combination with bearing carrier plate hole location. Approximately 1" or 1 1 4" difference in length between the left rear shackle and the right rear shackle is recommended for proper torsion arm angle with the left rear being longer. Our black anodized shackle rods

00" diameter snout spindles only

Steering arms and hardware

1/2"-20 lug nuts (25-131) are sold separately

Powder coated black

Hyper Racing # 03-035-1

Hyper Racing # 02-145B

Hyper Racing # 01-090

Hyper Racing # 02-290

Hyper Racing # 03-160

Hyper Racing # 03-599-K

Hyper Racing # 03-040-1

Hyper Racing # 02-060