Jeep Gladiator JT 20-24 Rear Upper or Lower Control Arm Bolts UPGRADEUpgrade your front lower, rear upper or rear lower control arm bolts with these heavy duty Grade 8 hardened yellow zinc plated fine thread hex bolts, stover lock nuts and washers. All the hardware is Grade 8, even the washers. These will fit tighter in the factory mounting holes and bushings to reduce slop in the suspension that can lead to death wobble. Fits the front lower, rear upper or rear lower control arms on all 2020 current Jeep Gladiator

Fits 2005-2010 Jeep Grand Cherokee WK and 2006-2010 Jeep Commander XK

Complete set of (8) Grade 8 hardened black flange bolts and (8) prevailing torque flange lock nuts for attaching both rear bumperettes to the frame on all Jeep CJ's and Wrangler YJ's from 1976-1995

1968 Jeep J-2800

Upgrade your shock bolts with this set for the rear shock

equivalent to Grade 9) hardened yellow zinc plated (for excellent corrosion resistance) 12-point flange bolts for attaching the driveshaft u-joint straps to the pinion yoke on many Jeep and Dodge models

These shouldered bolts will fit tighter in the bushings to reduce slop in the suspension that can lead to death wooble

they must be welded in and they are 3/4" OD so the factory 5/8" nutsert holes must be enlarged

(6) Grade 8 hardened yellow zinc plated transfer case mounting studs and (6) Grade 8 hardened zinc plated free spinning washer nuts to attach the transfer case to the transmission on 87-95 Jeep Wrangler YJ

1976-1986 CJ7

Complete set of bolts to attach the steering column gasket / bracket to the firewall

There are 4 configurations of this kit available

Includes 4 long bolts and 2 short