Jowat 280.30 EVA Hotmelt Adhesive - UnfilledTranslucent hot melt. Suitable for primed PVC, ABS, PP , veneer, solid wood and resinated paper edgebands. Can also be used for softforming. Medium Viscosity. Application Temp.: 180 200C (356 392F) Appearance: Yellow transparent Density at 20C [g cm]: Approx. 1. 05 0. 05 (Jowat test method) Softening Range [C]: Approx. 90 5 (Kofler Heat Bench) Open time at 190C [s]: Approx. 9 2 (Jowat test method) Viscosity at 200C [mPa s]: 50,000 15,000 Note: most

CLEANER CUTS: -5° teeth hook angle means a less aggressive cut and results in less chip-out and cleaner cuts overall

Provides extremely long life and uniform finish

590-0300 TOK Insert Knives

In connection with the special Cleaning Agent LP163/93®

Type B is a hook shape with a round pin

D=Nut Diameter

and General - and save time by eliminating repeated dumping

10 liter (2

Premium aluminum oxide mineral on a heavy F wt

Translucent hot melt

The LP289/99® Antistatic Coolant Agent is sprayed directly onto the adhesive joint after the edge band has been bonded

A closed coat belt that provides a consistent finish